Cryoblaster MINI 3.0 cleans with dry ice particles (solid CO2), which evaporate immediately upon impact with dirt. No water, no chemicals, no abrasives.
Cryoblaster “MINI 3.0” is ideal for car washes, auto repair shops and detailing centers. The device is specially designed for cleaning the engine compartment.
The parameter “3.0” indicates that the cryoblaster belongs to the third generation of modern cryoblasters from IRBISTEKH®, which has the technology of an ultra-modern granule feed unit with increased protection against water ingress into compressed air (RU patent No. 2813440 dated 03/13/2023 + USA and EU).
Best cleaning power for minimal investment
Allows quick cleaning of light dirt.
Allows point removal of solid contaminants.
Due to the expanding hopper, the frame turned out to be the most compact on the market.
Consumption for dust deposits: 5 kg;
A compressor with a capacity of 1000-2500 nl/min or a receiver of 500-900 liters is needed.
You need a compressor with a capacity of 1000-1800 nl/min or a receiver of 500-900 liters.
A compressor with a capacity of 1000-1800 nl/min or a receiver of 500-900 liters is needed.
Volume 20-50 liters for transportation and storage of 3-mm dry ice granules.
Bulk density of granules 0.8 kg/liter. Evaporation 10-20% per day.
Directly dry ice granules with a diameter of 3 mm.
2-3 kg for cleaning the engine compartment or the interior of a car.
Cities – dry ice producers:
– St. Petersburg, Moscow, Nizhnekamsk, Tolyatti;
– Nizhny Novgorod, Voronezh, Chelyabinsk;
– Yaroslavl, Omsk, Perm, Yekaterinburg, Rostov-on-Don, Kirov;
– Novosibirsk, Ryazan, Volgograd, Saratov, Barnaul;
– Krasnodar, Krasnoyarsk, Khabarovsk, Vladivostok.
Working pressure up to 7 atm.
Air consumption:
– 1,000 l/min at 2 bar (dust deposits in the cabin);
– 1,500 l/min at 4 bar (dust deposits in the engine compartment);
– 2,000 l/min at 6 bar (dried oil);
– 2,500 l/min at 8 bar (stale oil with dirt);
For short-term work on solid contaminants, you can use an air receiver of 500-900 l.
The American blaster was used for almost 10 years, and in 2023, the cryoblaster ONE 2.0 was purchased. The installation has already worked 640 hours without failures. The included nozzles are no worse than the American ones. The supersonic nozzle saves 17% of dry ice compared to the flat one.
The TRANSFORMER 2.0 cryoblaster has a competitive advantage due to the built-in shredder, which is important for cleaning vent channels and saves dry ice.
We would like to note the convenience of the built-in variational shredder, due to which we reduce the consumption of dry ice during its storage and during the cleaning process.
We would like to note especially the quality of the equipment assembly, simplicity and at the same time reliability of operation.
According to the experts who operate the cryoblaster, this blaster is not inferior in cleaning efficiency to imported analogues from the EU.
We would like to note especially the quality of the equipment assembly, simplicity and at the same time reliability of operation.
The TRANSFORMER 2.0 cryoblaster performed better, working from a 7 atm pneumatic network than its German counterpart, powered by a 9 atm diesel compressor.
What is dry ice blasting?
Dry ice blasting, also known as dry ice cleaning, is an environmentally sustainable cleaning and surface preparation technology. Dry ice blasting uses recycled solid carbon dioxide (CO2) pellets or microparticles that are blasted at supersonic speeds and sublimate on impact, lifting dirt and contaminants from the substrate. Dry ice blasting is non-abrasive, non-conductive, non-toxic and non-flammable. It also contains no chemicals, no water and creates no secondary waste streams.
How do dry ice blasting machines work?
Dry ice blasters spray carbon dioxide pellets or microparticles at supersonic speeds using compressed air. These pellets/particles then sublime on impact and lift dirt and contaminants from the substrate.
What is dry ice blasting used for?
Dry ice blasting is a non-destructive solution for cleaning, surface preparation and finishing of parts. Dry ice blasting does not require water or cleaning chemicals and produces no secondary waste. Dry ice blasting (cleaning) can be used in industries such as aerospace and aviation, automotive, contract cleaning, food and beverage, plastics and composites, restoration, textile and more. Common applications in these industries include adhesive, coating and corrosion removal, composite tool cleaning, refurbishment, parts finishing and surface preparation. As you can see, dry ice blasting can be used for a wide range of applications.
What dry ice blasting equipment options do I have?
Irbisteh offers our top-notch dry ice blasting equipment, both new and used. As an OEM, you can rest assured that you are getting the best equipment and the customer service/support you deserve. Click here to learn more about our purchasing options.
Why should I choose dry ice blasting over another surface cleaning and preparation method?
Dry ice cleaning offers a non-toxic, environmentally sustainable alternative to traditional cleaning methods that does not create secondary waste during the cleaning process, does not require chemicals, and does not use valuable and expensive water during the cleaning process. It can also reduce time and labor costs compared to other methods.
Is dry ice blasting dangerous?
Since dry ice blasting involves the use of dry ice, there are certain safety precautions that should be taken to ensure the safety of all personnel. Some key safety precautions include: - Ensuring proper ventilation - Limiting exposure - Identifying and marking areas where CO2 may accumulate - Wearing and using proper PPE, such as gloves, goggles, and tongs. Dry ice blasting itself is not dangerous, but there are safety precautions that should always be taken. To learn more about CO2 and dry ice safety, click here.
How much does dry ice cleaning cost?
Dry ice blasting machine prices range from 650,000 rub to 2,000,000 rub. Talk to a sales representative today for a more customized quote.
We provide the most technologically advanced systems for dry ice cleaning, surface preparation, parts finishing and dry ice production. To fulfill our mission of providing value and protecting the environment, our equipment uses or produces products that are inert, non-conductive, non-corrosive and do not create hazardous waste.
Our managers will contact you shortly
